Research & Development
Kronos Speed Loader Rival Ball Compatibility
Posted by Tetsu Y on
The following is a list of RIVAL type ammo that have been tested for compatibility with our Kronos Speed Loaders. Official Nerf Rival High Impact Rounds: Works perfectly. HeadShot ammo (Old Version): Slightly larger than official Nerf HIRs. Does not load as smoothly. HeadShot ammo (New Version): Works perfectly. DartZone BallistixOps: Works Perfectly Out or Darts Proton Rounds: larger than official Nerf HIRs. Does not load as smoothly. * Thank you to "scruffy_nerd_nerfer" on instagram for testing HeadShot ammo and Proton Rounds against the Official Nerf HIRs.
Avoid NFSTRIKE V1.0 Darts
Posted by Tetsu Y on
Avoid using NFSTRIKE V1.0. darts in high crush flywheel blasters. NFSTRIKE V1.0 darts look similar to Nerf Elite darts and have a soft dart head but the base of these dart heads are incredibly stiff. The stiff base of these dart heads are nearly impossible to compress from the sides causing major issues for high crush flywheel blasters. These NFSTRIKE V1.0 darts cause frequent jamming and if the darts do fire, dart velocity is dramatically reduced. When these darts jam, there is a massive risk of stalling and burning out your motors. These NFSTRIKE V1.0 darts are fine when used with Springer...
Worker Talon Magazine MOLLE Holders
Posted by Tetsu Y on
Just entered the world of half length darts with the Worker Talon magazines. I saw that there were still no magazine holders for these so I made some. Here are a few different prototypes that led to the final design.
Massive Battery stocks and lucky charms
Posted by Tetsu Y on
BIG Battery Stock With the release of the new Worker Dominator blaster people are now seeing the need for an internal battery stock. You're not gonna be able to run three sets of flywheels with a tiny LIPO in the battery tray. I already have the compact internal battery stock but that's not big enough for some people so now I'm working on this absolute unit. The green one is the very first prototype of this and the one on the right is the compact version that is already out. This first prototype looks disproportionate and therefore ugly. We'll see...
Gen2 Kronos Spring Spacer & Hasbro Nerf manufacturing inconsistencies
Posted by Tetsu Y on
Gen2 Kronos Spring Spacer update Hasbro has started manufacturing the Kronos Blasters with a different spring. The new springs are shorter and have thicker gauge coils. These new springs don't compress as much as the previous springs that they used. The original gen1 spring spacers are too thick to work with the new springs. The Gen2 Kronos Spring Spacer is a two piece design so that it is compatible with both versions of the Kronos spring. If you have the old style Kronos spring, you would use both included spacers to get the correct compression. If you have the newer...